Product Detail
XGY - 10 microcomputer control pipe hydrostatic testing machine

XGY - 10 microcomputer control pipe hydrostatic testing machine

Value:
0.00
Detail

Xgy-10 / 20 pipe hydrostatic testing machine

1、 LCD control, touch screen control, computer control, etc. It is safe, reliable and practical. Pipeline pressure professional testing equipment. Can provide Chinese, English, French, Russian and other operating systems for export.

2、 Brief introduction of pipe hydrostatic testing machine / pipe blasting testing machine:

Pipe hydrostatic testing machine is designed and manufactured according to the requirements of GB / t6111-2018 test method for internal pressure resistance of thermoplastic pipes for fluid transportation and GB / t15560 test methods for hydraulic instantaneous burst and pressure resistance of plastic pipes for fluid transportation. It is used to determine thermoplastic pipes and composite pipes (such as PP-R, PP-B, pp-a, PE, PE-X, PVC, PVC-U, PVC-C) according to the requirements of GB / t6111-2018 test method for internal pressure of thermoplastic pipes for fluid transportation and GB / t15560 test methods for hydraulic instantaneous burst and pressure resistance of plastic pipes for fluid transportation It is a necessary testing equipment for plastic pipe manufacturers and testing institutions to determine the maximum pressure value of instantaneous explosion or pressure failure time under constant internal pressure and temperature for a long time.

3、 The pipe hydrostatic testing machine / pipe burst testing machine meets the following standards:

GB / T 6111-2018 determination of internal pressure resistance of thermoplastic piping systems for fluid transportation

GB / T 15560-1995 test method for hydraulic instantaneous burst pressure of plastic pipes for fluid transportation

GB / T 13663.1-2017 polyethylene (PE) piping systems for water supply part 1: General

GB / T 13663.2-2018 polyethylene (PE) piping systems for water supply part 2: Pipes

GB / T 13663.3-2018 polyethylene (PE) piping systems for water supply part 2: fittings

GB / T 13663.5-2018 polyethylene (PE) piping systems for water supply part 5: system suitability

GB / T 15558.1-2015 buried polyethylene (PE) piping systems for gas - Part 1: Pipes

GB / T 18992.1-2003 cross linked polyethylene piping systems for hot and cold water

GB / T 18992.2-2003 cross linked polyethylene pipes for hot and cold water systems

Rigid polyvinyl chloride (PVC-U) pipes for water supply (GB / T 10002.1-2006)

GB / T 10002.2-2003 rigid polyvinyl chloride (PVC-U) pipe fittings for water supply

GB / T 18992.1-2003 cross linked polyethylene (PE-X) piping systems for hot and cold water - Part 1: General

GB / T 18992.2-2003 cross linked polyethylene (PE-X) piping systems for hot and cold water - Part 2: Pipes

GB / T 18993.1-2003 chlorinated polyvinyl chloride (PVC-C) piping systems for hot and cold water - Part 1: General

GB / T 18993.2-2003 chlorinated polyvinyl chloride (PVC-C) piping systems for hot and cold water_ Part 2: Pipes

GB / t18252-2008 "Plastics piping systems - Determination of long-term hydrostatic strength of thermoplastic materials in the form of tubes by extrapolation"

GB / t4217-2008 nominal outer diameter and nominal pressure of thermoplastic pipes for fluid transportation

4、 Main technical parameters of pipe hydrostatic testing machine / pipe blasting testing machine:

1. (1-12 channels) independent control of test pressure and test time

2. Pressure range: 0-10mpa / 20MPa

3. Maximum working pressure 10MPa / 20MPa

4. High pressure plunger pump

(1) Pressure: 20MPa

(2) Flow rate: 251l / min

(3) Speed: 1450rpm / min

5. Pressure control accuracy: 2% of the upper limit and - 1% of the lower limit of the test pressure value (can be set according to the requirements)

6. Pressure value resolution: 0.001mpa

7. Pressure sensor: test pressure sampling frequency 0.1 s

8. Temperature control range: 95-95 ℃

9. Temperature control accuracy: ± 0.5 ℃

10. Timing range: 0.1s-9999h

11. Timing accuracy: 0.1s

12. Pressure unit MPa, PA, bar can be automatically converted

13. Automatic 24-hour data storage

14 water tank heating power: 9kw

15. Host power supply: 380VAC / 220VAC mixed (three-phase four wire system)

5、 Technical features of hydrostatic testing machine for pipe materials:

① The equipment of this project can be controlled automatically without manual adjustment, which is convenient and fast.

② This equipment can realize fast pressing. The accuracy of test data is greatly improved.

③ It is safe and easy to operate.

④ Multi channel sub control, to provide customers with greater test space.

⑤ LCD, computer multiple control, high reliability. Automatic setting, self-determination calculation, all pressures have pressure maintenance, which makes the test data more accurate and stable.