Product Detail
Wj-400d melt flow rate tester

Wj-400d melt flow rate tester

Code: 000002865
Series: 220
Spec: Equipped with
Material: Stainless steel
Color: white
Brand: wanji
Model: yes
Value:
0.00
Detail

WJ - 400D melt flow rate tester

One, use:

Wj-400d melt flow rate meter conforms to GB/T 3682-2018 "Determination of melt mass flow rate and melt volume flow rate of thermoplastics" standard, used for the determination of the fluidity MI of thermoplastic polymers at high temperature, such as: Determination of melt index of polyethylene PE, polypropylene PP, resin ABS, polycarbonate PC, nylon PA6 and other plastic raw materials. The products are widely used in plastic raw material production factories, plastic products factories, petrochemical companies and other industries, as well as related universities, scientific research institutes and quality inspection units.

Two, melt flow rate meter in line with the standard:

ASTM D 1238-13 Standard Test method for Melt Flow Rates of Thermoplastics Using an Extruder Plastic Meter

Iso1133:2012 Thermoplastics - Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR)

GB/T3682-2018 Thermoplastics -- Determination of melt mass flow rate and melt volume flow rate

GBT 3682.1-2018 Plastic thermoplastics - Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) - Part 1: Standard method

GBT 3682.2-2018 Plastics thermoplastics -- Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) -- Part 2: Test method for materials sensitive to time-temperature history and/or humidity

Three, melt flow rate meter features:

The instrument adopts touch screen control, Chinese characters, English or French display. Automatic temperature control, automatic cutting, real-time display of each section of the test curve, with a micro printing data function, can display and print eight sections of experimental data and the average value of the results of each section can also achieve "time control cutting, displacement cutting".

Among them, WJ-400D melt flow rate meter has two measurement methods of mass (MFR) and (MVR), and has the function of automatic detection of melt density test.

Four, melt flow rate meter working principle

WJ - 400D melt flow rate meter is a plastic extrusion instrument. It is in the specified temperature conditions, with high temperature heating furnace to be measured to the molten state. This molten state of the measured material, under the specified load through a certain diameter hole extrusion test. In the production of plastics, commonly used melt index to express polymer materials in the molten state of fluidity, viscosity and other physical properties. The melt mass flow rate refers to the average weight of each section of the extruded sample translated into 10 minutes of extruded volume.

Five, melt flow rate meter test parameters;

1, display mode: LIQUID crystal display.

2, measurement method: mass method (MFR) volume method (MVR).

3, constant temperature range: room temperature - 450℃ any point can be constant temperature.

4, temperature accuracy: ±0.01℃.

5, temperature resolution: 0.01℃.

6, timing range: 0.01 -- 999.00 seconds.

7, timing accuracy: 0.01 seconds.

8, cutting mode: automatic, manual, time control three cutting mode.

9, automatic calculation of financial index, equipped with printer, can print test report.

10, piston displacement display resolution: 0.001mm Piston displacement accuracy: ±0.001mm

11, melt flow rate test range: 0.001~5000g/10 min (MFR)

O.001 ~ 5000cm3/10min (MVR)

12, control mode: double temperature control (upper and lower barrel mold temperature control respectively) +SSR+ electric plate

13, heating time: 10 minutes

14, die plug gauge: aperture 2.0904/ 2.1006mm

15, piston: φ (9.4742 ±0.007) mm piston head length 6.35mm soil 0.10mm

Lower edge radius 0.4 -- (0.0-0.1) mm.

Piston rod thin ring reference line distance 30 mm 0.01 mm

16, fine hole die: tungsten carbide material

Outer diameter :(9.55 ±0.005) mm

Aperture :(2.0955 ±0.0051) mm

Length :(8.00 ±0.001) mm

17, the load weight (0.325kg, 1.2kg, 2.16kg, 3.8kg, 5.0kg, 10.0kg, 12.5kg, 21.6kg) eight levels of load, suitable for all materials testing.

18, power rate: 450W

19. Power source: AC220V, 50Hz

20. It has the function of overtemperature protection, and automatically stops heating when the temperature reaches the limit.

21, all-weather starting test, can operate 24 hours a day, the whole year starting work efficiency is high.

22, Chinese English French and other operating systems